Application Instructions
What you need, before you start:
- Clean flat surface
- Screen cleaning cloth
- Xacto knife or similar
- Hair blow dryer, or similar device
Instructions
- Start by cleaning your device thoroughly. Make sure there are no dust particles that are left behind, and that it is completely dry.
- Using an Xacto knife, remove any vinyl cut outs that you don't want to come with the vinyl for application (ie. small holes etc).
- Gently remove the vinyl from the backing, and try not to touch the adhesive side more than required. Lightly apply the vinyl to the device. The material is made to allow for adjustments before you apply pressure.
- Once you are happy with the placement, apply pressure to apply and remove any bubbles. The material has air channels to release bubbles, gently apply from the center working towards the edges.
- Work the vinyl around the curves. Use heat (such as a hairdryer) to soften and adhere the vinyl around the curves.
- Use heat to conform around curves and edges. Heat is also recommended for removal.
